Cutting Plotter Summa S2 T140 140cm

Models

           S2 T75

      S2 T120

       S2 T140

      S2 T160

Cut Type

True Tangential with Drag Knife Cutting Mode Capability

Cut Widths

S2 T75 29.2-inch (74.2 cm)
(Extended Mode: width of the material)

S2 T120 47.2-inch (120 cm)
(Extended Mode: width of the material)

S2 T140 53.1-inch (135 cm)
(Extended Mode: width of the material)

S2 T160 62.2-inch (158 cm)
(Extended Mode: width of the material)

Cut Speed

All S2 models cut at speeds up to 56 inches (1414 mm) per second diagonal

Axial Speed

Up to 4 G

Maximum Acceleration

Up to 5.5 G diagonal

Repeatability

Within ± 0.004 in. (0.1 mm) on plots up to 40 ft. (12 m) long

Tracking

164 ft. (50 m) long

Cut Force

0-600 grams of down-force, in 5 gram increments

Display Language

English; French; German; Dutch; Italian; Spanish; Polish; Czech; Latvian; Portuguese

Connectivity

USB; Ethernet

Power Requirements

AC 100V to 240V ±10% 48-62Hz, 85 VA maximum

Dimensions

S2 T75 55.5 (W) x 26.8 (D) x 43.7 (H) in. 141 (W) x 68 (D) x 111 (H) cm

S2 T120 73.6 (W) x 26.8 (D) x 43.7 (H) in. 187 (W) x 68 (D) x 111 (H) cm

S2 T140 73.6 (W) x 26.8 (D) x 43.7 (H) in. 225 (W) x 68 (D) x 111 (H) cm

S2 T160 88.6 (W) x 26.8 (D) x 43.7 (H) in. 225 (W) x 68 (D) x 111 (H) cm

Shipping Weight

S2 T75 152 lbs (69 kg)

S2 T120 190 lbs (86 kg)

S2 T140 214 lbs (98 kg)

S2 T160 251 lbs (114 kg)

Operating Temperature

59˚ to 95˚F (15˚ to 35˚C)

Standard Accessories

WinPlot or MacSign Cut Software, CutterControl Parameter Software, CD w/ Manuals and Drivers, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), 1 Spare Fuse, Blade Holder, Standard Nose Piece, 2 Standard 36° Tangential Blades, Thick Material Nose Piece, 1 Thick 60° Blade, Tangential Drag Holder, 1 Standard 36° Drag Blade, Pouncing Pin and Holder, T Pen holder, 1 Ball point pen, Pouncing and Pen Nose Piece, 2 Cut-off Razor Blades, Blade insertion tool, Stand and Basket.